Hub Dynamos in Australia
-
- Posts: 6
- Joined: Sat May 28, 2011 11:06 am
Hub Dynamos in Australia
Postby sayapria » Sat May 28, 2011 2:17 pm
My question is why we do not have these hub dynamos readily available at reasonable prices?
Seems strange that something green like this saving on batteries is not encourage by Bike shops here
- Xplora
- Posts: 8272
- Joined: Sat Dec 11, 2010 12:33 am
- Location: TL;DR
Re: Hub Dynamos in Australia
Postby Xplora » Sat May 28, 2011 6:00 pm
The issue is you have to have the hub built into the wheel, and you have to buy a light, and if you're going the Schmidt path with a decent rim this can retail around 750 bucks for a front wheel and lights. Most people are expecting carbon missile wheels for that money (and rightly so).
Of course, if you treat your bike as a serious vehicle, 750 bucks is nothing compared to repayments on a luxury car, and the Schmidt is a luxury on your bike. As I said, it comes down to the LBS lacking the vision to see that there is a market for these kinds of lights and they need to develop the segment. In Germany, that segment is a legal requirement. Gotta have lights. Why not have good ones?
I look forward to getting my Schmidt dynamo, if I could only decide on the rim to match!
-
- Posts: 5470
- Joined: Mon Mar 12, 2007 2:23 pm
- Location: Yangebup
Re: Hub Dynamos in Australia
Postby Baalzamon » Sat May 28, 2011 6:28 pm
No you don't, not in this day and age. Get a modern dynamo light that comes with an inbuild capacitor such as the supernova line, or Busch & Mueller line of lights and you will have lights even when stopped. My supernova E3 triple will give me 5mins light when stopped and on my commute I do not stop for more than 2 minutes at a time.sayapria wrote: Also another excuse is that if I stop at a traffic light, the dynamo will stop generating electricity and I will have no lights, etc...
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Hub Dynamos in Australia
Postby il padrone » Sat May 28, 2011 6:36 pm
*cough*Xplora wrote:The issue is you have to have the hub built into the wheel, and you have to buy a light, and if you're going the Schmidt path with a decent rim this can retail around 750 bucks for a front wheel and lights.
Slight re-assessment required there. I've bought and had built up, two Schmidt hubs.
$220 for the hub (bought from Starbike)
$70 for the rim (bought from Bike24)
$80 for the build
Total for dynahub wheel = $370
$80 for B&M IQ Cyo
$45 for B&M Seculite
Total cost = $555 (That is with a great 4-5 min standlight and 'senso' automatic on/off function)
You can of course do this a good deal more cheaply using a Shimano Nexus dynohub. I bought one for my son for $105 from Wiggle.
So with the same sort of rim just $450 and your rolling, wheel and lights.
You still have a few days left to obtain this special offer via BV, BTas and BWA.
"An unjustified and unethical imposition on a healthy activity."
- damhooligan
- Posts: 3409
- Joined: Mon Mar 09, 2009 5:16 pm
- Location: melbourne
- Contact:
Re: Hub Dynamos in Australia
Postby damhooligan » Sat May 28, 2011 6:40 pm
Lot's of people find it to much work to firstly buy a bike, then buy a hub dynamo and then have the whole bike rebuild...
Doesn't even makes sense to me.
What does makes sense is selling commuter bikes and with the whole lot.
Hub and lights, ready to go for a fixed price.
Rather then asking for just hubs, we should ask for complete bikes.
SCHIJNVEILIGHEID !!
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Hub Dynamos in Australia
Postby il padrone » Sat May 28, 2011 6:47 pm
$1699 is a reasonable price for a very fine city bike made in the Netherlands.
"An unjustified and unethical imposition on a healthy activity."
- damhooligan
- Posts: 3409
- Joined: Mon Mar 09, 2009 5:16 pm
- Location: melbourne
- Contact:
Re: Hub Dynamos in Australia
Postby damhooligan » Sat May 28, 2011 6:53 pm
il padrone wrote:Go to the right places and you'll find them eg. Gazelle do them
I don't know all the gazelle models,but after looking at the site the most gears you get is 7-8-9 for a dynamo hub bike.
Considering that those puppys are not light and australia has hills, i don't think they fit the bill.
They are more designed for cruizin around the city.
Would love to see more variety.
SCHIJNVEILIGHEID !!
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Hub Dynamos in Australia
Postby il padrone » Sat May 28, 2011 7:16 pm
I thought that 'cruizin around the city' aka commuting was what you were talking about . A friend of mine, a retired school teacher and mother of three, rides a nexus 8sp bike on country tours, up all sorts of hills carrying loads. She did our easter ride into the Strathbogies and had a great time, some steep climbs she walked, but so did riders on derailleur bikes. Here she's about to climb Gall's Gap (14%)damhooligan wrote:They are more designed for cruizin around the city.
No, you won't find an off the shelf road racer specced with a dynohub. I doubt this exists anywhere as a production run item. Maybe a Thorn Audax bike from UK ??
"An unjustified and unethical imposition on a healthy activity."
- damhooligan
- Posts: 3409
- Joined: Mon Mar 09, 2009 5:16 pm
- Location: melbourne
- Contact:
Re: Hub Dynamos in Australia
Postby damhooligan » Sat May 28, 2011 7:36 pm
I was more thinking that flatbar road bikes with 27 gears are common here, and very suitable for 'australian' commutes.
They could be vey interesting bikes if they where fitted standard with dynamo hubs and light..
Mayby I have to 'make' them myself and sell them...
But gazelle defenatly is a good option, and it is blue...
SCHIJNVEILIGHEID !!
-
- Posts: 5470
- Joined: Mon Mar 12, 2007 2:23 pm
- Location: Yangebup
Re: Hub Dynamos in Australia
Postby Baalzamon » Sat May 28, 2011 8:32 pm
HEYdamhooligan wrote:
I was more thinking that flatbar road bikes with 27 gears are common here, and very suitable for 'australian' commutes.
They could be vey interesting bikes if they where fitted standard with dynamo hubs and light..
Mayby I have to 'make' them myself and sell them...
That was my idea...
Maybe we can go into business together
- ghettro
- Posts: 960
- Joined: Mon Mar 02, 2009 9:38 am
- Location: London, UK
Re: Hub Dynamos in Australia
Postby ghettro » Sat May 28, 2011 11:41 pm
Cell bikes sells dynamo stuff, I think they used to offer a dynamo light wheel as an option.
http://www.this link is broken/search-result?search=dynamo
Either way it's a lot cheaper and there is a hell of a lot more choice if you import from places like www.starbike.com. I have a complete dynamo setup on my raleigh twenty which cost a total of $110 (bike already has a dynamo hub) - this is front and back LED with standlights
http://smutpedaller.blogspot.com/2010/0 ... grade.html
- Xplora
- Posts: 8272
- Joined: Sat Dec 11, 2010 12:33 am
- Location: TL;DR
Re: Hub Dynamos in Australia
Postby Xplora » Sun May 29, 2011 10:35 am
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Hub Dynamos in Australia
Postby il padrone » Sun May 29, 2011 10:44 am
Reviews of a selection of dynamos (some that I've never heard of) can be found here. Unusual to read his criticism of the SON28 as having too much vibration through the handlebars. I have never noticed any significant problem here - sometimes I can pick up a slight flutter, not what I'd call vibration
"An unjustified and unethical imposition on a healthy activity."
- damhooligan
- Posts: 3409
- Joined: Mon Mar 09, 2009 5:16 pm
- Location: melbourne
- Contact:
Re: Hub Dynamos in Australia
Postby damhooligan » Sun May 29, 2011 10:56 am
Baalzamon wrote:HEYdamhooligan wrote:
I was more thinking that flatbar road bikes with 27 gears are common here, and very suitable for 'australian' commutes.
They could be vey interesting bikes if they where fitted standard with dynamo hubs and light..
Mayby I have to 'make' them myself and sell them...
That was my idea...
Maybe we can go into business together
Sounds fine by me...
SCHIJNVEILIGHEID !!
-
- Posts: 1916
- Joined: Mon Jan 21, 2008 11:21 am
- Location: Perth
Re: Hub Dynamos in Australia
Postby mitzikatzi » Sun May 29, 2011 11:16 am
damhooligan wrote:Baalzamon wrote:HEYdamhooligan wrote:
I was more thinking that flatbar road bikes with 27 gears are common here, and very suitable for 'australian' commutes.
They could be vey interesting bikes if they where fitted standard with dynamo hubs and light..
Mayby I have to 'make' them myself and sell them...
That was my idea...
Maybe we can go into business together
Sounds fine by me...
Would the bike model be called the "Damzammon" or the "Baalhooligan" ?
- damhooligan
- Posts: 3409
- Joined: Mon Mar 09, 2009 5:16 pm
- Location: melbourne
- Contact:
Re: Hub Dynamos in Australia
Postby damhooligan » Sun May 29, 2011 11:31 am
mitzikatzi wrote:Would the bike model be called the "Damzammon" or the "Baalhooligan" ?damhooligan wrote:Sounds fine by me...Baalzamon wrote: HEY
That was my idea...
Maybe we can go into business together
SCHIJNVEILIGHEID !!
-
- Posts: 5470
- Joined: Mon Mar 12, 2007 2:23 pm
- Location: Yangebup
Re: Hub Dynamos in Australia
Postby Baalzamon » Sun May 29, 2011 2:55 pm
il padrone wrote:Just came across this hub dynamo that I've never heard about. Interesting, I'll read up on it.
Reviews of a selection of dynamos (some that I've never heard of) can be found here. Unusual to read his criticism of the SON28 as having too much vibration through the handlebars. I have never noticed any significant problem here - sometimes I can pick up a slight flutter, not what I'd call vibration
I too have not noticed any vibrations coming from my SON28 either. I'm running Schwalbe Marathon Plus tyres with my current Son28 in a 36 spoke configuration so that may have something to do with it.
-
- Posts: 2631
- Joined: Tue Oct 20, 2009 10:36 pm
Re: Hub Dynamos in Australia
Postby eeksll » Sun May 29, 2011 7:34 pm
I commute everyday and I consider it a nice to have.
-
- Posts: 5470
- Joined: Mon Mar 12, 2007 2:23 pm
- Location: Yangebup
Re: Hub Dynamos in Australia
Postby Baalzamon » Sun May 29, 2011 10:47 pm
Ah but the luxury of NOT having to charge batteries, or worry about batteries going flat on a ride with failing light.eeksll wrote:the price of a dynamo setup is still quite pricey.
I commute everyday and I consider it a nice to have.
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Hub Dynamos in Australia
Postby il padrone » Sun May 29, 2011 11:05 pm
And run the lights day and night regardless..... because you canBaalzamon wrote:Ah but the luxury of NOT having to charge batteries, or worry about batteries going flat on a ride with failing light.
"An unjustified and unethical imposition on a healthy activity."
-
- Posts: 2631
- Joined: Tue Oct 20, 2009 10:36 pm
Re: Hub Dynamos in Australia
Postby eeksll » Sun May 29, 2011 11:53 pm
initially why I went and researched them quite thoroughly. Came home a couple of times in the dark and noticed my rear light was not on!!! That and I like to tinker and play around with things.Baalzamon wrote:Ah but the luxury of NOT having to charge batteries, or worry about batteries going flat on a ride with failing light.eeksll wrote:the price of a dynamo setup is still quite pricey.
I commute everyday and I consider it a nice to have.
I am also still a bit unsure how visible the rear lights are compared to my current one (radbot 1000) especially when its pouring with rain during peak hour, also no flashing mode. And it was going to cost at least $400 before figuring out shipping.
- pvb123
- Posts: 78
- Joined: Sat Jul 12, 2008 11:24 am
- Contact:
Re: Hub Dynamos in Australia
Postby pvb123 » Sun May 29, 2011 11:56 pm
Hi Guys,damhooligan wrote:il padrone wrote:Go to the right places and you'll find them eg. Gazelle do them
I don't know all the gazelle models,but after looking at the site the most gears you get is 7-8-9 for a dynamo hub bike.
Considering that those puppys are not light and australia has hills, i don't think they fit the bill.
They are more designed for cruizin around the city.
Would love to see more variety.
I hope you don't mind I chime in here.
I thought I would add to this discussion by saying that a Gazelle bike is totally fine for hilly areas but you have to choose the right model.
It is true for most of the hub gear bikes that they are designed for more shorter city riding. However I have done 100's of kms in hilly areas with the derailleur versions and they work great. In fact I regularly pass other people on mountain bikes because the Dutch Hybrids have narrow tyres, efficient geometries and high quality components.
The derailleur bikes are lighter weight and therefore feel more lively but they have all the features to make them perfectly practical in city uses too. I would argue that these bikes are the perfect bikes for many Australian uses actually.
And then you can get the 11-speed Alfine versions as well, which can go just about anywhere.
Cheers,
Paul
- AUbicycles
- Site Admin
- Posts: 15674
- Joined: Tue Aug 23, 2005 2:14 am
- Location: Sydney & Frankfurt
- Contact:
Re: Hub Dynamos in Australia
Postby AUbicycles » Mon May 30, 2011 6:11 am
Incidently, I spoke with the chief engineer of SON in March, they are a small outfit and well regarded.
In Australia, I see a growing interest, trend towards bikes with hub dynamo's as city biking / commuting grows.
- ghettro
- Posts: 960
- Joined: Mon Mar 02, 2009 9:38 am
- Location: London, UK
Re: Hub Dynamos in Australia
Postby ghettro » Mon May 30, 2011 2:14 pm
As for visibility of lights, i'd say generally most dynamo lights are generally better designed because they are usually built to German standards which are quite strict. Side visibility I'd say is much better generally speaking. Also I find solid lights much easier to track than flashing rear lights.
- ghettro
- Posts: 960
- Joined: Mon Mar 02, 2009 9:38 am
- Location: London, UK
Re: Hub Dynamos in Australia
Postby ghettro » Mon May 30, 2011 2:16 pm
Return to “Buying a bike / parts”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.