Hi All,
Okay this may sound weird but what types of techniques are there for pedaling effectively. I know it may look like my legs are just going around and around but what should I be focusing on to get the best and sustained effort from my pedaling?
Cycle Training
-
- Posts: 2
- Joined: Mon Jun 29, 2009 11:54 am
-
- Posts: 2083
- Joined: Mon Aug 13, 2007 10:07 am
- Location: Adelaide
Re: Cycle Training
Postby silkishuge » Tue Dec 15, 2009 3:04 pm
Use a trainer if you want to improve pedeling style. 1.5 hs before work and 1.5 hrs after work for 3 months did wonders for me. It is extremely boring though so be inventive in your traning program.
J
J
- Alex Simmons/RST
- Expert
- Posts: 4997
- Joined: Fri May 02, 2008 3:51 pm
- Contact:
Re: Cycle Training
Postby Alex Simmons/RST » Tue Dec 15, 2009 9:11 pm
1. Make sure your bike is well fitted to you.
2. Focus on effort level.
3. Choose a gear that feels good.
4. Ride lots.
2. Focus on effort level.
3. Choose a gear that feels good.
4. Ride lots.
- JV911
- Posts: 5458
- Joined: Mon Sep 01, 2008 1:22 pm
- Location: Sydney, Australia
Re: Cycle Training
Postby JV911 » Wed Dec 16, 2009 8:37 am
you're overthinking...just ridemadiganmichael wrote:Hi All,
Okay this may sound weird but what types of techniques are there for pedaling effectively. I know it may look like my legs are just going around and around but what should I be focusing on to get the best and sustained effort from my pedaling?
^^^ listen to yodaAlex Simmons/RST wrote:1. Make sure your bike is well fitted to you.
2. Focus on effort level.
3. Choose a gear that feels good.
4. Ride lots.
-
- Posts: 2
- Joined: Mon Jun 29, 2009 11:54 am
Re: Cycle Training
Postby madiganmichael » Wed Dec 16, 2009 3:38 pm
Thanks All for your comments so far. I guess what I'm hearing so far is practice makes perfect. So I shouldn't think about where my power comes from or pushing from the toes but just ride. Thanks again and if there is anymore advise out there I for one would greatly appreciate it.
- Romper
- Posts: 241
- Joined: Sat Sep 12, 2009 11:28 am
Re: Cycle Training
Postby Romper » Fri Dec 18, 2009 5:10 pm
I have incorrect technique (a bit toey) so I got told to hop on the trainer twice a week and use 1 leg at a time, and to try and get a continuous, even whir/noise for the trainer if you get what i mean. when you get a consistent noise it means that your using the whole pedal stroke or something.
I'm sure someone else could explain it better
I'm sure someone else could explain it better
Romper! now stiff yet vertically compliant
- Alex Simmons/RST
- Expert
- Posts: 4997
- Joined: Fri May 02, 2008 3:51 pm
- Contact:
Re: Cycle Training
Postby Alex Simmons/RST » Fri Dec 18, 2009 6:24 pm
Why is being "a bit toey" incorrect technique?Romper wrote:I have incorrect technique (a bit toey) so I got told to hop on the trainer twice a week and use 1 leg at a time, and to try and get a continuous, even whir/noise for the trainer if you get what i mean. when you get a consistent noise it means that your using the whole pedal stroke or something.
I'm sure someone else could explain it better
One legged pedalling will address one legged pedalling technique but the motor recruitment patterns required for that task are different to that required for two legged pedalling. The motor recruitment patterns change as soon as you go back to using two legs. If doing one legged work, then at least one should inertially load the opposite non-drive pedal/crank in order to as closely approximate the motor patterns used in two legged pedalling. But really, why bother unless you don't have use of both legs (temporarily or permanently) or are training to ride one legged?
Here's a tip: use as many legs as you have avaialble, all of the time.
- Chuck
- Posts: 4376
- Joined: Fri Mar 14, 2008 10:19 pm
- Location: Hiding in the bunch
Re: Cycle Training
Postby Chuck » Fri Dec 18, 2009 6:38 pm
Alex Simmons/RST wrote: Here's a tip: use as many legs as you have avaialble, all of the time.
You'd think the message was starting to get through by now
FPR Ragamuffin
- Romper
- Posts: 241
- Joined: Sat Sep 12, 2009 11:28 am
Re: Cycle Training
Postby Romper » Sat Dec 19, 2009 2:07 pm
Scratch what i said, Alex probably knows more then the guys at my lbs.
LISTEN TO HIM
LISTEN TO HIM
Romper! now stiff yet vertically compliant
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.