I'm a champion bike mechanic...
-
- Posts: 656
- Joined: Thu Apr 25, 2019 9:56 am
Re: I'm a champion bike mechanic...
Postby blizzard » Sun Jun 16, 2024 4:51 pm
- P!N20
- Posts: 4091
- Joined: Thu Jul 22, 2010 6:50 pm
- Location: Wurundjeri Country
Re: I'm a champion bike mechanic...
Postby P!N20 » Mon Jun 17, 2024 9:38 am
Next job is to clean and grease the brake caliper pistons then bleed the system and get this bad boy on the road.
-
- Posts: 3182
- Joined: Sat Sep 12, 2020 1:14 pm
Re: I'm a champion bike mechanic...
Postby Mr Purple » Sun Jun 23, 2024 12:57 pm
Right cleat jumped out of the pedal while accelerating at the beginning of today's 74km ride and it's hard to tell just how worn it was before I skidded along the road with it for a little bit, but it's certainly very worn now!
Lesson learned. Loose pedal, check cleat. Also log mileage on cleats on Strava like every other consumable on the bike.
-
- Posts: 656
- Joined: Thu Apr 25, 2019 9:56 am
Re: I'm a champion bike mechanic...
Postby blizzard » Sun Jun 23, 2024 6:43 pm
-
- Posts: 12387
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: I'm a champion bike mechanic...
Postby jasonc » Sun Jun 23, 2024 6:46 pm
-
- Posts: 656
- Joined: Thu Apr 25, 2019 9:56 am
Re: I'm a champion bike mechanic...
Postby blizzard » Sun Jun 23, 2024 7:42 pm
Any reason for the upgrade or just because? I would probably leave it wireless on the Aethos for aesthetic reasons.
-
- Posts: 294
- Joined: Thu Feb 08, 2024 2:28 pm
- Location: Wadawurrung land/VIC
Re: I'm a champion bike mechanic...
Postby CmdrBiggles » Sun Jun 23, 2024 7:53 pm
Snazzy.
DuraAce wireless has been spoken of as the equal to SRAM's RED. I would be interested in feedback about comparative performance of both that riders have had. Me, if confronted by a choice of bike with SRAM RED or DuraAce, I would leap for DuraAce. I am not exactly turned on by the drab look of SRAM's RED gruppo compared to the holographic finish of the FORCE.
I have seen the DuraAce transmission on a few higher end MERIDA roadies in Melbourne shops.
Anxiety about wireless shifters is overcooked I think. Mark your calendar for replacement after two years, at the start or end of Daylight Savings, or some other notable event. I carry a spare battery pair in my seat pack. There will be prior warning up front on the computer.
2022 Dragon Raptor e-scooter ['Yellow Peril']
-
- Posts: 12387
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: I'm a champion bike mechanic...
Postby jasonc » Sun Jun 23, 2024 8:35 pm
I wanted the hidden buttons. Looking at the weight saving between 105, ultegra and dura-ace. I thought why not! Bike bug had 10% off so I did it. So far from stock aethos comp with 105 di2 it now has:
- a lighter stem (shorter)
- carbon bars (narrower)
- ultegra crank
Before it left the shop it got a 155 power saddle
This weekend I've replaced:
- dura-ace cranks and levers
First time using the shimano app to connect the shifters and derailleurs. Worked well
- ultegra cassette
On order is a set of wheels
Now I have more stuff to sell
I like the idea of a single battery to maintain. There are enough batteries on my bike
-
- Posts: 429
- Joined: Tue May 14, 2013 6:17 pm
- Location: Hobart, Tasmania
Re: I'm a champion bike mechanic...
Postby 2wheels_mond » Sun Jun 23, 2024 9:13 pm
On 105 Di2 I find it a pretty painless process, especially considering my crankset power meter has a battery that lasts as least as long as the Di2. Once the notification comes up on my Garmin, next time I'm home I just sit a powerbank in the bottle cage with a cable coming out for the Di2 battery and the power meter battery. Only have to do it once a month at most. Can't get much easier than that!
-
- Posts: 3182
- Joined: Sat Sep 12, 2020 1:14 pm
Re: I'm a champion bike mechanic...
Postby Mr Purple » Mon Jun 24, 2024 6:46 am
What's your bike weight down to Jason?jasonc wrote: ↑Sun Jun 23, 2024 8:35 pmI wanted the hidden buttons. Looking at the weight saving between 105, ultegra and dura-ace. I thought why not! Bike bug had 10% off so I did it. So far from stock aethos comp with 105 di2 it now has:
- a lighter stem (shorter)
- carbon bars (narrower)
- ultegra crank
Before it left the shop it got a 155 power saddle
This weekend I've replaced:
- dura-ace cranks and levers
First time using the shimano app to connect the shifters and derailleurs. Worked well
- ultegra cassette
On order is a set of wheels
I was vaguely looking at that model - 7.5kg with the hefty DT Swisse R470 wheelset (1780g). You could replace the wheelset with a Farsports or Light Bicycle for not a huge amount and get it under 7kg. Carbon bars and a lighter saddle and it's below the UCI limit.
-
- Posts: 12387
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: I'm a champion bike mechanic...
Postby jasonc » Mon Jun 24, 2024 7:06 am
Bottle cages are from aliexpress and weigh 13g each
-
- Posts: 3182
- Joined: Sat Sep 12, 2020 1:14 pm
Re: I'm a champion bike mechanic...
Postby Mr Purple » Mon Jun 24, 2024 8:05 am
Pretty much the same set I'd go with - make sure you use the Hambini code, they still worked when I last bought a set.jasonc wrote: ↑Mon Jun 24, 2024 7:06 amI'm not weighing it till the wheels arrive. Technically I already have the wheels as they are on my tarmac. They are farsports feder dt240s 28mm wide, 35mm deep. I've ordered exactly the same. The new ones will go on my tarmac as it will get used more.
Bottle cages are from aliexpress and weigh 13g each
Instant 500g weight saving there!
-
- Posts: 12387
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: I'm a champion bike mechanic...
Postby jasonc » Mon Jun 24, 2024 1:08 pm
The wheels are already ordered
- bychosis
- Posts: 7313
- Joined: Sat Jan 14, 2012 1:10 pm
- Location: Lake Macquarie
Re: I'm a champion bike mechanic...
Postby bychosis » Mon Jun 24, 2024 4:30 pm
Much better than the last efforts requiring several attempts to get it right.
I'll leave the true champion mechnic comments until completing truing. Its a bit wobbly so far but was getting late last night.
-
- Posts: 12387
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
- bychosis
- Posts: 7313
- Joined: Sat Jan 14, 2012 1:10 pm
- Location: Lake Macquarie
Re: I'm a champion bike mechanic...
Postby bychosis » Thu Jun 27, 2024 4:52 pm
Back into the home made truing stand and it looked like it was dished completely wrong. Yep. When reversed in the stand it was out. Turns out I'd not set the hub in the axle stand bit properly. Couple more measures and the hub set more level. Loosen all the left spokes, tighten all the right ones to re-dish. Still not overly true, but close enough for a test ride.
-
- Posts: 920
- Joined: Sun May 15, 2011 4:52 pm
Re: I'm a champion bike mechanic...
Postby stevenaaus » Thu Jun 27, 2024 5:23 pm
I never had the heart to tell him , as mate was always doing gratis bike repairs. Anyway , i gave another retired mate an article on wheel building, and he re did the thing (wheel was for himself).
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: velocipedist
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.