Hub Dynamos in Australia
- Ross
- Posts: 5742
- Joined: Sat Nov 07, 2009 8:53 pm
Re: Hub Dynamos in Australia
Postby Ross » Mon Mar 27, 2017 7:53 pm
https://cyclingtips.com/2017/03/bikes-2 ... heel-race/
Kristof Allegaert - Supernova dynamo hub powers both front and rear supernova lights
Mike Hall - The front light is powered by a Shutter Precision dynamo hub, nicely finished off with Hall’s name engraved on the surface
Jesse Carlsson - Carlsson’s lighting is supplied by Klite.com.au and is powered by a Shutter Precision dynamo hub
Harley “Durian Rider” Johnstone - a klite.com.au front light powered by a Shutter Precision Dynamo Hub
Matthijs Ligt - Supernova front light
Mark “Cycling Maven” Ferguson - Shutter Precision dynamo hub powers what looks to be a Busch and Muller front light. The rear light is the tried and tested Exposure Blaze which lasts for approximately 48 hours at low burn
Jan-Willem Bobbink - Busch and Muller front light powered by a dynamo hub
Claire Stevens - Exposure lights provide visibility both front and rear
-
- Posts: 1808
- Joined: Tue Sep 01, 2009 12:21 am
- Location: Perth, Western Australia
- Contact:
Re: Hub Dynamos in Australia
Postby eldavo » Tue Mar 28, 2017 12:44 pm
I'm likely looking soon for a purple anodised or light blue/sky blue (teal in Salsa speak) anodised disc dynamo hub 15x100mm axle for a 29 plus bike with beach use salt spray on the sea breeze.
My B&M Luxos U on Sondelux has left with its bike to a new owner. I never used the USB charging feature as I didn't do any rides out of town, and having the cabling unused with no disconnect kills minimalism the original Edelux allowed, though the Edelux only lights spot light tunnel of wheel track ahead, no spread beam "armbeyonce" like the Luxos U, that's really nice for night trail rides with a bigger battery spread beam lamp o-ring mounted pointed high with easy tilt down. The LuxosU high/low power feature was nice for pedestrians on the trail too, polite gesture showing light dimmed, and the lens always able to ride seeing only peoples hips and arms moving, not blinding them in the face.
I couldn't tell if the Luxos U cache battery load was slowing the wheel, the light indicates when it's charging, at night in use that would be all the time I suppose, where the Edelux I think I knew if Edelux was switched off I'd have my freewheel without drag? It's been a couple years so need to get up to speed again. The Edelux has the strong solid mount not with the potential B&M housing issues... and I already have it, so likely start with it until I find one to beat the Luxos U love out of me.
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Hub Dynamos in Australia
Postby RonK » Tue Mar 28, 2017 1:01 pm
So, in other words all those with a dynamo are using Shutter Precision hubs, since Supernova and Exposure hubs (even if they are using 'em) are rebranded SP's.Ross wrote:Cycling Tips have an overview (pretty broad) of equipment used (inc lights/dynamo hubs) by some of the Indian Pacific Wheel Race participants
-
- Posts: 33
- Joined: Thu Oct 15, 2015 9:50 am
Re: Hub Dynamos in Australia
Postby 00tones00 » Tue Mar 28, 2017 2:06 pm
FWIW - I transitioned from an 18 month old Shimano M475 hub (which hadn't been serviced yet after ~9,000km and was starting to get a bit notchy) to a SP PD8 hub with Luxos U light and my strava segment times (especially flat segments) on my commute got consistently faster by a few percent (a small but noticeable step change between the months before and after the change). The step change is less than the day to day variation in time though.eldavo wrote: I couldn't tell if the Luxos U cache battery load was slowing the wheel,
-
- Posts: 1808
- Joined: Tue Sep 01, 2009 12:21 am
- Location: Perth, Western Australia
- Contact:
Re: Hub Dynamos in Australia
Postby eldavo » Tue Mar 28, 2017 2:15 pm
All commute path riding, no rough trails involved with the Luxos U?
-
- Posts: 33
- Joined: Thu Oct 15, 2015 9:50 am
Re: Hub Dynamos in Australia
Postby 00tones00 » Tue Mar 28, 2017 2:29 pm
No "Rough" trails on the dynamo (I have a 29er wheelset for that). Commute is concrete bike path and reasonable to average bitumen (and the curbs between them). I've read about people having issues with the durability of the plastic bracket on the Luxos U so I'm reasonably careful not to smash it into potholes etc. and its removed if I take my bike on single track with appropriate wheels. I have used the dynamo + light setup a few times on the BMX and MountainX tracks at Homebush though but I never go fast enough to leave the ground as my bike is a touring bike and doesn't have suspension. I also use mudguards and the optional reflector under the Luxos U light to prevent water ingress in the hole under the light. Its been used in very heavy rain such as last week with no problems.eldavo wrote:All commute path riding, no rough trails involved with the Luxos U?
-
- Posts: 1808
- Joined: Tue Sep 01, 2009 12:21 am
- Location: Perth, Western Australia
- Contact:
Re: Hub Dynamos in Australia
Postby eldavo » Tue Mar 28, 2017 2:38 pm
My bike would be rigid road trail 29plus seeking urban offroad, bush track, beach, so rules out the B&M housing, plus from your reminder the drain hole I forgot about I'd probably not have a mudguard/shovel. I'll have to check the fork has steerer cavity for fork crown mounting bung, else it loses one of the benefits of the dynamo offroad path shadow casting of the bits to dodge.
- find_bruce
- Moderator
- Posts: 11065
- Joined: Mon May 09, 2011 8:42 pm
- Location: Sydney
Re: Hub Dynamos in Australia
Postby find_bruce » Tue Mar 28, 2017 4:08 pm
Know any good anodisers? Tough enough to find hubs for 15mm through axles.eldavo wrote:I'm likely looking soon for a purple anodised or light blue/sky blue (teal in Salsa speak) anodised disc dynamo hub 15x100mm axle for a 29 plus bike with beach use salt spray on the sea breeze.
- baabaa
- Posts: 1618
- Joined: Sun Apr 19, 2009 8:47 am
Re: Hub Dynamos in Australia
Postby baabaa » Tue Mar 28, 2017 5:19 pm
viewtopic.php?f=77&t=91185&p=1362382&hi ... 0#p1362382
(Pic with the front blue hope skewer not showing but if I hold up any of the blue salsa or hope stuff up to the SP still looks the same to me)
-
- Posts: 1808
- Joined: Tue Sep 01, 2009 12:21 am
- Location: Perth, Western Australia
- Contact:
Re: Hub Dynamos in Australia
Postby eldavo » Wed Mar 29, 2017 2:22 am
I'll be looking for Salsa's "teal" aka baby blue, sky blue, light blue, pastel blue...
https://1554652485.rsc.cdn77.org/i/p/2/0/79602_00_c.jpg
https://www.universalcycles.com/images/ ... /62921.jpg
- baabaa
- Posts: 1618
- Joined: Sun Apr 19, 2009 8:47 am
Re: Hub Dynamos in Australia
Postby baabaa » Wed Mar 29, 2017 10:34 am
-
- Posts: 1808
- Joined: Tue Sep 01, 2009 12:21 am
- Location: Perth, Western Australia
- Contact:
Re: Hub Dynamos in Australia
Postby eldavo » Wed Mar 29, 2017 10:37 am
- MichaelB
- Posts: 15535
- Joined: Tue Feb 20, 2007 9:29 am
- Location: Adelaide, South Australia
Re: Hub Dynamos in Australia
Postby MichaelB » Sun Apr 23, 2017 3:44 pm
Appears that my SP dunno Hun has pooped it's bearings. Wheel has been making some creaking noises and thought it was a loose spike or crack in a rim/hub, changed the wheel with a spare, and noises gone.
Finally got around to having a good look at the wheel and couldn't see anything, so re-fit it to bike but it seemed not hay. And I mean REALLY notch and it was quite a bit noisier.
So it seems the hearing may be cactus and due for replacement.
Any suggestions on best/quickest way to get them fixed and what the cost is ?
Ta
Michael B
-
- Posts: 622
- Joined: Sat Mar 14, 2009 8:13 am
- Location: Nillumbik, Vic
Re: Hub Dynamos in Australia
Postby wqlava1 » Sun Apr 23, 2017 4:06 pm
- MichaelB
- Posts: 15535
- Joined: Tue Feb 20, 2007 9:29 am
- Location: Adelaide, South Australia
Re: Hub Dynamos in Australia
Postby MichaelB » Sun Apr 23, 2017 5:19 pm
It's built up in a wheel, so I'd prefer to post it while, hence an option in Oz.wqlava1 wrote:Post the hub to SP in Taiwan and pay them USD30 for changing the bearings and return post. If it's still inside the 2 year warranty it may be cheaper.
If I'm going to I build it, might as well buy a new one and get 2 year warranty again
Hub is 3 years or more , so no warranty
Have sent email to k-lite and see if they can help.
Other options are a new one from eBay (AT) $180 or one from Germany at about $155 or so landed.
Hmmmmm
May just try myself .....
-
- Posts: 622
- Joined: Sat Mar 14, 2009 8:13 am
- Location: Nillumbik, Vic
Re: Hub Dynamos in Australia
Postby wqlava1 » Sun Apr 23, 2017 6:26 pm
[Edit - xxcycle doesn't seem to have cheap postage on wheels to Australia any more - but Bike24 isn't bad for postage and has some dynohub wheels.]
- find_bruce
- Moderator
- Posts: 11065
- Joined: Mon May 09, 2011 8:42 pm
- Location: Sydney
Re: Hub Dynamos in Australia
Postby find_bruce » Sun Apr 23, 2017 6:40 pm
- MichaelB
- Posts: 15535
- Joined: Tue Feb 20, 2007 9:29 am
- Location: Adelaide, South Australia
Re: Hub Dynamos in Australia
Postby MichaelB » Sun Apr 23, 2017 8:46 pm
Both helpful and give me ideas. Will try pulling it apart per Wouters page 1st and see how I go.
Thanks
- MichaelB
- Posts: 15535
- Joined: Tue Feb 20, 2007 9:29 am
- Location: Adelaide, South Australia
Re: Hub Dynamos in Australia
Postby MichaelB » Mon Apr 24, 2017 8:14 am
Email back from Kerry at K-Lite confirms SP only for hub refresh.
Alternates are getting a new hub from bike-components.de landed at $132, a full wheel (with CL hub but 32 spoke) for $230. I can get a black 28 hole PL-8 from Intelligent design for $200.
Seems the only sensible route is to demount, have a quick crack myself or ship to SP in Taiwan.
Almost any way around it involves a demount out of the wheel assy.
Bugger. Double bugger. PFBB.
Will print out the pics from Wouter, and see how I go. Wish me luck !!!
Thanks
MB
- MichaelB
- Posts: 15535
- Joined: Tue Feb 20, 2007 9:29 am
- Location: Adelaide, South Australia
Re: Hub Dynamos in Australia
Postby MichaelB » Wed Apr 26, 2017 10:36 am
Pulled it apart, but damaged the wires, so it's time to get a new hub and see if I can resuurect the SP at a later date as a spare.
Trying to decide what the best course of action is. Options are ;
a) New PD-8, 28 hole, 6 bolt disc mount, A$132 delivered - rebuild to existing rim
b) New PL-8, 28 hole, centre lock disc mount, A$200 delivered - rebuild to existing rim
c) Wheel assy with PL-8, centre lock disc mount 32 hole, $230 delivered
d) Son 28, centre lock disc mount, 28 hole (need new spokes), $323 delivered (+ spokes) - rebuild to existing rim
e) Hunt SuperDura dynamo wheelset with Son 28 centre lock disc hub, $550 delivered
I like Options B & C because of the centre lock disc mount, but still faced with the potential unbuild-rebuild to redo trhe bearings at some stage
Or plunk up now for the Son 28, but are they user rebuildable ?
-
- Posts: 237
- Joined: Fri Dec 01, 2006 10:49 am
- Location: The 'gong
Re: Hub Dynamos in Australia
Postby avolve » Wed Apr 26, 2017 2:20 pm
I am looking at either the SPPD 8X 150mm or Son 28 150mm for a new build. Quite a bit of difference in price (approx. $250 v $400)!RonK wrote:So, in other words all those with a dynamo are using Shutter Precision hubs, since Supernova and Exposure hubs (even if they are using 'em) are rebranded SP's.
MichaelB's Q is very relvant...
MichaelB wrote: Or plunk up now for the Son 28, but are they user rebuildable ?
-
- Posts: 622
- Joined: Sat Mar 14, 2009 8:13 am
- Location: Nillumbik, Vic
Re: Hub Dynamos in Australia
Postby wqlava1 » Wed Apr 26, 2017 2:44 pm
- find_bruce
- Moderator
- Posts: 11065
- Joined: Mon May 09, 2011 8:42 pm
- Location: Sydney
Re: Hub Dynamos in Australia
Postby find_bruce » Wed Apr 26, 2017 3:22 pm
I went with the PL-8 on my latest build because I can easily swap between my disc brake & rim brake bikes. I have seen the PL-8 from €95 delivered ~$A138, but not in 28 hole
What condition is your rim in Michael ? Personally if the rim is good, I would go for option B.
- MichaelB
- Posts: 15535
- Joined: Tue Feb 20, 2007 9:29 am
- Location: Adelaide, South Australia
Re: Hub Dynamos in Australia
Postby MichaelB » Wed Apr 26, 2017 3:39 pm
Answer appears to be a resounding no. Same as the SP hubs. But, reports seem that they last 2 - 3 x longer.avolve wrote: ..MichaelB wrote: Or plunk up now for the Son 28, but are they user rebuildable ?
I can get the PL-8 with the DT 466d for $230 delivered. Shimano hubs are just as user serviceable too ....wqlava1 wrote:Or an already built Shimano DH-3D72 with DT Swiss 466 rim for about $200 delivered from bike24. None of the Shimano hubs are as efficient as SON or SP, but still pretty reliable - just avoid the cheaper numbered Shimano hubs with 20-something or 30-something as the last two characters.
PD-8 cheapest was bike-components.de, but bike24.de is only a couple of euro more.find_bruce wrote:$132 delivered for the PD-8 is a good price - whereabouts did you find it ?
I went with the PL-8 on my latest build because I can easily swap between my disc brake & rim brake bikes. I have seen the PL-8 from €95 delivered ~$A138, but not in 28 hole
What condition is your rim in Michael ? Personally if the rim is good, I would go for option B.
Rim is good (DT Swiss R460db only 12 months old), so will probably go Option B. Have found a 28 hole in black with an Aussie supplier foir $205 delivered, so will go with that option. I like centrelock, a lot.
BTW, St Kilda cycles have some Son Delux hubs for $169, but only 36 hole in silver or black
https://stkildacycles.com.au/lights-dyn ... -sale.html
Didn't go that route because it would mean a new rim, spokes and then faff about with the connection.
-
- Posts: 763
- Joined: Wed Oct 28, 2009 11:31 pm
Re: Hub Dynamos in Australia
Postby hamishm » Thu May 11, 2017 2:18 pm
What's next? Another one ($290 locally, ouch), or something else? K-Lite? Can I fix it?
I like
- compact for combination light, battery, charging (charging essential for my Edge 1000 on long days)
Less impressive
- Cable insulation coming away at the remote switch
- Beam not super impressive
- Would like flashing mode if possible
Didn't like
- Weatherproofing
- That it broke after a couple of years on the road.
Return to “Buying a bike / parts”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.